
Drive-In Rack in Bartlett, TN
Drive-in rack in Bartlett fits wholesale distributors and building-products suppliers along the Stage Road corridor that carry deep stock of a few items. Bagged goods, shingles and seasonal HVAC equipment are typical examples.
Near Appling Farms and Brunswick, most buildings are mid-height, so floor savings matter more than stacking higher.
Building Products in Drive-In Pallet Rack
Bagged mortar, grout and concrete mix arrive by the truckload. Those pallets are heavy and alike.
A dense block holds them without long rows of selective bays. Drivers load and pull from one face.
Heavy loads need properly sized load arms and sound pallets, so I review both.


Operations We Rack Around Here
Nearby areas we work in regularly include the Stage Road and Appling industrial area, Stage Road corridor, Appling Farms, Brunswick.
Drive-Thru Racking for Wholesale Rotation
Some wholesale items carry dates or lot numbers. Drive-thru racking opens both ends so the oldest pallets leave first.
It needs aisles on two sides. In buildings with docks at both ends, that layout fits naturally.
Seasonal HVAC Stock
HVAC suppliers build inventory before summer. Condensers and boxed units fill many pallet positions for a few months.
Drive-in lanes absorb that peak, then hold other bulk items the rest of the year.
Truck and Rail Sizing
Lanes are sized to your forklift's mast width and guard height. Floor rails guide the truck and protect uprights.
Service fleet parts operations sometimes use smaller trucks, which allow narrower lanes.
I measure every truck that will enter the block.
Other Options for Bartlett
Shallow depth suits pushback rack in Bartlett. High-volume dated stock suits pallet flow rack in Bartlett.
Installation crews we schedule and manage work around will-call hours.
Planning a Bartlett Block Around Docks
In wholesale buildings near Brunswick, I place the dense block close to receiving so bulk inbound loads travel the shortest distance.
Selective rack for mixed items then sits between the block and shipping. Drivers pull bulk pallets only when an order calls for them.
Column spacing in older Stage Road buildings often decides how many lanes fit per bay, so I measure the grid before drawing.
Drive-In Rack Pallet Requirements for Supply Houses
Supply houses receive from many vendors, and pallet styles vary. Dense lanes need consistent pallets because rails catch only the edges.
I recommend one pallet style per lane and a receiving check for broken boards.
Where vendor pallets vary widely, slave pallets solve the problem.
Drive-In Pallet Rack Versus Pushback for Bartlett Stock
Pushback keeps drivers outside the rack and picks faster, but costs more per position and rarely goes past six deep.
Drive-in costs less per position and goes deeper, but drivers enter the lanes.
For Bartlett suppliers holding ten or more pallets of an item, drive-in usually wins. For four to six, pushback often does.
Bartlett Questions I Hear at the Counter
Suppliers ask whether a dense block will slow will-call pulls. For bulk items sold by the pallet, it rarely does, since drivers pull from the open face.
They ask about mixing pallet sizes. Each lane should hold one size, but different lanes can hold different sizes.
They ask whether lanes can be added later. Rows extend at the end if floor allows.
And they ask how many lanes they need. That comes from your peak pallets per item, which is the first number I request.
Building products dealers near Appling Farms often begin with a few lanes for bagged goods and add more as seasons prove the value.
HVAC and plumbing suppliers near Brunswick also ask about storm season. Anchored uprights and loads within rated capacity are the right answer, and both are part of every install we do.
Each answer goes on the drawing, and revisions are free until the layout fits how your team actually works.
Most Bartlett blocks go up in a few working days once steel arrives on site.
Who We Are
As a division of Warehouse Equipment & Supplies Co., we have supplied and installed rack since 1997. See the drive-in rack page or our Bartlett service area page.
Recent Installations
Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.










Get a Drive-In Rack Quote for Your Bartlett Warehouse
Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.
Memphis Pallet Rack
2298 Young Ave.
Unit #389
Memphis, TN 38104
(901) 417-6960Monday - Saturday: 8:00 AM - 6:00 PM
Bartlett Drive-In Rack Questions
Other Rack Types We Supply in Bartlett

Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Cantilever Rack
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View details
Warehouse Relocation
Teardown, labeling, transport coordination, and reinstallation of pallet rack and warehouse storage systems in your next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.
Where We Work
Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.
Memphis Pallet Rack
Address
2298 Young Ave.
Unit #389
Memphis, TN 38104
Phone
(901) 417-6960Business Hours
Monday - Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
Need Drive-In Rack in Bartlett?
Call (901) 417-6960 or request a quote and we will get a layout started.