Serving the Greater Memphis Area
    Cantilever Rack system inside a Tennessee warehouse
    Bartlett, Tennessee

    Cantilever Rack in Bartlett, TN

    Cantilever rack in Bartlett is a natural fit for the building products and plumbing suppliers along the Stage Road corridor. Pipe, lumber, gutter and trim are long, and posts in the way slow every pick.

    From Appling Farms to Brunswick, I see yards and warehouses that need the same thing: open arms that a forklift can reach from the front.

    (901) 417-6960

    Pipe and Fittings Yards

    HVAC and plumbing supply houses store copper, PVC and steel pipe by size. Each size gets its own arm level or section.

    Round stock rolls, so I specify inclined arms or arm stops. That keeps bundles in place when a neighbor is pulled.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Operations We Rack Around Here

    Nearby areas we work in regularly include the Stage Road and Appling industrial area, Stage Road corridor, Appling Farms, Brunswick.

    Building products
    HVAC and plumbing supply
    Wholesale distribution
    Service fleet parts

    Outdoor Cantilever Rack for Stage Road Yards

    Many Bartlett suppliers keep material outside. Galvanized uprights and arms handle rain and summer humidity.

    Roof kits add cover without a building. Spring storms are a reason to anchor outdoor runs properly and keep loads within rated capacity.

    Cantilever Racking for Lumber and Sheet Goods

    Building products dealers carry studs, trim, plywood and drywall. Long lumber goes on arms; sheet goods can sit on decked levels.

    Heavy sheet goods stay low. Lighter trim goes higher where hand picking is still possible.

    Double-sided runs fit in the middle of the floor and serve two aisles at once.

    Will-Call Speed

    Contractors want to pull up, load and leave. A cantilever storage rack near the will-call gate puts common lengths in reach of one forklift move.

    Wholesale distribution buildings can mirror that layout indoors with a single-sided wall run.

    What I Check Before Quoting

    Load length, bundle depth and weight set arm length and spacing. Truck type sets aisle width.

    I also check floor condition for outdoor runs. Installation crews we schedule and manage anchor uprights to suit it.

    The result is a CAD layout and itemized quote from the free design consultation.

    Cantilever Rack Layout for a Supply House Floor

    Inside a Bartlett supply house, I usually put a single-sided wall run for pipe and a double-sided island for lumber or trim. The forklift aisle sits between them.

    Fast sizes go near the will-call door. Slow sizes go deeper in the building.

    Short cut lengths sold over the counter can sit on a lower hand-pick level.

    Service Fleet Parts and Long Stock

    Service fleet operators near Appling Farms keep ladders, conduit and pipe on hand for crews. A small cantilever run near the van bays keeps that stock off the floor.

    Techs grab what they need in the morning without hunting through a pile.

    Arm Count and Bundle Weight

    A 20-foot bundle of steel pipe resting on two arms puts half its weight on each. Rest it on three, and each carries a third.

    That math lets me choose lighter arms when spacing is tight, or fewer uprights when arms are heavier. I run both options and price the one that fits your stock.

    Sizing Arms for Gutter, Trim and Downspout

    Gutter and trim pieces are light but bend if supported only at the ends. Closer upright spacing and shorter arms keep them straight without overspending on heavy steel.

    Downspout and flashing boxes can sit on a decked level right below, so related items are picked from one spot.

    I group these by color or profile, which is how counter staff look for them.

    For Stage Road yards that also sell sheet goods, I keep those decked levels near the loading lane so a single forklift move fills a contractor's truck.

    That keeps will-call traffic short during the morning rush.

    Brunswick yards with tight gates benefit from shorter runs placed parallel to the entrance.

    Narrow gates also favor side-loaders over wide counterbalance trucks.

    Pallet Rack Options in Bartlett

    Palletized goods with rotation fit pallet flow rack in Bartlett. Bulk pallets of one item fit drive-in rack in Bartlett.

    As a division of Warehouse Equipment & Supplies Co., we have supplied and installed since 1997. See our cantilever rack page or the Bartlett service area page.

    Lumber, plywood, and sheet goods
    Pipe, tube, conduit, and bar stock
    Steel service center inventory
    Furniture, doors, and windows
    Long or awkward loads currently sitting on the floor
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Cantilever Rack Quote for Your Bartlett Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Bartlett Cantilever Rack Questions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Cantilever Rack in Bartlett?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call