
Cantilever Rack in Memphis, TN
Cantilever rack in Memphis is what I specify when the load is longer than a pallet bay is wide. Arms reach out from a line of uprights with no front columns in the way, so a 20-foot bundle of pipe or bar slides straight on and off.
River- and rail-served yards on President's Island and around the Frank C. Pidgeon Industrial Park handle a lot of that material. So do older buildings along the Lamar Avenue corridor.
Why Long Loads Outgrow Selective Rack
A selective pallet bay has a post every eight to twelve feet. Long steel either hangs past the beams or gets cut down to fit, and both are bad ideas.
Cantilever racking removes the front posts. The only limit on load length is how many arms you place under it.
If your stock is boxed or palletized, stay with pallet rack. Cantilever is for shapes that do not sit on a pallet.


Operations We Rack Around Here
Nearby areas we work in regularly include the airport and I-240 distribution belt, Airport/Nonconnah, Frayser, Raleigh, Hickory Hill.
Cantilever Storage Rack on President's Island
Port and intermodal users near the CN/CSX terminal often store outside. Outdoor cantilever is hot-dip galvanized so rain and humidity do not eat the steel.
Some yards add a roof kit to the uprights, which keeps loads drier without building a shed.
Sizing Arms for Bar, Tube and Plate
Arm length follows load depth. A bundle that is 30 inches deep wants arms a little longer than that, never shorter.
Arm capacity is rated per arm, and the load spreads across however many arms touch it. I count the arms under your heaviest bundle and check each one.
Long thin tube sags between arms, so spacing matters as much as capacity. Stiff structural shapes allow wider spacing.
Forklift or Side-Loader Aisles
Counterbalance forklifts need wide aisles to swing long loads. Side-loaders run down narrow aisles carrying the bundle parallel to the rack.
In 20 to 24 foot clear buildings near the airport, aisle width usually costs more floor than rack height gains. Choosing the truck first sets the whole layout.
Single-Sided Against the Wall, Double-Sided in the Middle
Single-sided runs hug a wall and leave the floor open. Double-sided runs stand in the middle and load from both aisles.
Auto and truck parts distributors around Airways often mix both: bumpers and exhaust on a wall run, bar stock on an island.
Summer installs in non-air-conditioned buildings start early, and installation crews we schedule and manage stage steel the day before.
Cantilever Rack Questions I Ask Memphis Yards First
What is the longest piece you stock, and the heaviest bundle? Those two numbers drive upright spacing, arm count and base size more than anything else.
How does material arrive? Flatbeds from the BNSF yard on Lamar Avenue unload differently than barge steel moved off the river at the Port of Memphis.
Who pulls it, and with what truck? A yard running a 15,000-pound counterbalance needs different aisle math than a shop using a side-loader.
Bases, Braces and Upright Spacing
Every cantilever upright sits on a base that extends under the arms. Longer arms need longer bases, and that base length eats aisle space you might not expect.
Bracing ties pairs of uprights together and sets the bay width. I space uprights so the load always rests on at least two arms, and long flexible tube gets three or more.
Getting spacing right on paper is cheap. Adding uprights after the steel arrives is not.
Hot Summers and Outdoor Steel
Galvanized finish handles Memphis humidity far better than paint outdoors. Painted indoor runs are fine in a closed building near Hickory Hill or Frayser.
Crews working outside in July need shade, water and early starts, so I plan delivery and assembly sequences around the cooler hours.
Pallet Systems Next to Your Cantilever Rack
Palletized stock with dated rotation fits pallet flow rack in Memphis. Deep, single-SKU pallets fit drive-in rack in Memphis.
Memphis Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. See the cantilever rack product overview or our Memphis service area page.
Recent Installations
Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.










Get a Cantilever Rack Quote for Your Memphis Warehouse
Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.
Memphis Pallet Rack
2298 Young Ave.
Unit #389
Memphis, TN 38104
(901) 417-6960Monday - Saturday: 8:00 AM - 6:00 PM
Memphis Cantilever Rack Questions
Other Rack Types We Supply in Memphis

Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Fewer access aisles. The forklift enters supported lanes to store deep quantities of a small number of SKUs.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View details
Warehouse Relocation
Teardown, labeling, transport coordination, and reinstallation of pallet rack and warehouse storage systems in your next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.
Where We Work
Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.
Memphis Pallet Rack
Address
2298 Young Ave.
Unit #389
Memphis, TN 38104
Phone
(901) 417-6960Business Hours
Monday - Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
Need Cantilever Rack in Memphis?
Call (901) 417-6960 or request a quote and we will get a layout started.