Serving the Greater Memphis Area
    Pallet Flow Rack system inside a Tennessee warehouse
    Memphis, Tennessee

    Pallet Flow Rack in Memphis, TN

    Pallet flow rack in Memphis is the answer when the first pallet in has to be the first pallet out. Loads go in at the back of a sloped lane, roll forward on gravity rollers, and stop at the pick face where the next order takes them.

    Grocery and beverage distributors along the Airways and Lamar Avenue corridor live by that rule. So do 3PL tenants near the FedEx World Hub handling date-stamped product for national accounts.

    (901) 417-6960

    Why Memphis Food Distributors Run Pallet Flow Racking

    Food and beverage stock carries a date. If a driver can grab whichever pallet is closest, older loads get buried and eventually written off.

    Gravity lanes take the choice away. Replenishment happens in one aisle and picking in another, so rotation is automatic.

    Cold storage and freezer rooms around Hickory Hill gain even more, because every lost aisle in a chilled room is expensive to keep cold.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Pallet flow rack lanes with gravity rollers installed
    Flow racking system loaded with pallets at the pick face

    Operations We Rack Around Here

    Nearby areas we work in regularly include the airport and I-240 distribution belt, Airport/Nonconnah, Frayser, Raleigh, Hickory Hill.

    Third-party logistics
    Air freight and expedited
    Food distribution
    Light manufacturing

    Brakes, Speed Controllers and Pallet Condition

    Long lanes need speed controllers spaced along the rollers. They keep a loaded pallet rolling at walking pace instead of slamming the front stop.

    A pallet separator at the exit holds back the line so the driver lifts one load without the rest pushing behind it.

    Broken bottom boards are the enemy of any gravity flow rack. If your inbound pallets vary, budget for slave pallets or a receiving check.

    Lane Length in 20 to 24 Foot Buildings

    Older buildings near I-240 rarely run tall, so depth does the work. A lane four to eight pallets deep replaces several selective rows.

    I set lane depth from pallets per SKU, not from the room. A lane that holds ten when you stock four just sits half empty.

    Where Pushback Fits Better

    Not every deep lane needs FIFO. Reserve stock without a date often belongs in pushback rack in Memphis, which loads and picks from one aisle at a lower price per position.

    Case-level picking from the same SKUs is a different job. That is where carton flow rack in Memphis earns its keep.

    Air-Cargo and Parcel Volume

    High-volume SKUs near Memphis International Airport turn several times a shift. A flow lane keeps the next pallet ready the moment one leaves.

    That means drivers stop hunting and start pulling, which is what cutoff-driven operations need.

    Installing in a Running Building

    Most Memphis installs happen while freight keeps moving. Installation crews we schedule and manage phase lanes by row and plan early starts in July heat.

    Every lane gets tested with your loaded pallets before we hand it back to operations.

    What I Need From a Memphis Operation Before Drawing Lanes

    A SKU list with pallets on hand, pallets shipped per week and loaded pallet weight. That one spreadsheet sets lane depth, roller duty and controller spacing.

    Then the building: clear height to the lowest obstruction, column grid and where docks sit. Buildings near the BNSF facility on Lamar Avenue often have tight column spans that decide bay width before anything else.

    Pallet Flow Rack in Southwest Memphis Buildings

    River- and rail-served users on President's Island and around the Frank C. Pidgeon Industrial Park often handle bulk product that arrives in large lots. A gravity flow rack absorbs a full inbound lot and releases it in sequence.

    Those buildings tend to be older and lower, so I lean on lane depth and keep levels to what the clear height allows.

    Pallet Flow Racking Versus More Selective Rows

    A fair question is whether more selective rack would do the same job. It holds every pallet, but each needs its own aisle face and drivers pick whatever is closest.

    Flow lanes cost more per position yet save aisles and enforce rotation. For dated, high-volume SKUs, that trade usually pays back in written-off product avoided.

    Next Steps

    Memphis Pallet Rack works as a division of Warehouse Equipment & Supplies Co., which has supplied and installed rack since 1997. See the pallet flow rack product overview or return to our Memphis service area page.

    Date-coded food, beverage, and pharmaceutical inventory
    High-volume SKUs with steady, predictable turns
    Cold storage where every cubic foot carries a cost
    Staging finished goods coming off a production line
    Operations that need FIFO documented, not just assumed
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Pallet Flow Rack Quote for Your Memphis Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Memphis Pallet Flow Rack Questions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Pallet Flow Rack in Memphis?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call