Serving the Greater Memphis Area
    Drive-In Rack system inside a Tennessee warehouse
    Memphis, Tennessee

    Drive-In Rack in Memphis, TN

    Drive-in rack in Memphis is the densest way I know to store many pallets of a few SKUs. The forklift drives straight into the lane, guided by floor-level rails, and sets each pallet on continuous load arms that run the depth of the bay.

    That density is why grocery, beverage and freezer operators along the Airways and Lamar Avenue corridor ask for it. When every square foot is chilled, cutting aisles is the fastest way to lower the cost of each position.

    (901) 417-6960

    Where Drive-In Pallet Rack Earns Its Place in Memphis

    The right candidate is a product you hold ten, twenty or forty pallets deep. Bottled water, frozen vegetables, paper goods and seasonal beverage stock all fit that profile.

    Older buildings near I-240 and Hickory Hill usually sit at 20 to 24 feet clear. Height is limited, so removing aisles is where the added positions come from.

    If you carry hundreds of SKUs with two pallets each, this is the wrong tool. Selective bays serve that mix far better.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Drive-in pallet rack lanes fitted with continuous rails
    Drive-in warehouse racking loaded with bulk pallets

    Operations We Rack Around Here

    Nearby areas we work in regularly include the airport and I-240 distribution belt, Airport/Nonconnah, Frayser, Raleigh, Hickory Hill.

    Third-party logistics
    Air freight and expedited
    Food distribution
    Light manufacturing

    Rails, Guides and Truck Clearance

    Floor-mounted guide rails steer the forklift down the lane and protect the uprights. Rail height and spacing must match your truck's wheel track.

    I need the mast width, overhead guard height and lowered mast height of every truck that will enter. A few inches of error here means scraped uprights for years.

    Pallet width and overhang set the distance between load arms. Weak or undersized pallets can drop between rails, so I ask for photos.

    LIFO Lanes Versus Drive-Thru Racking

    A drive-in lane has one open end. The last pallet loaded is the first one out, which suits stock without strict dates.

    Drive-thru racking opens both ends. Receiving loads one face and shipping pulls from the other, giving first in, first out without gravity rollers.

    Drive-thru needs an aisle on both sides of the block, so it uses more floor. I draw both options when dates matter.

    Freezer Buildings Near the Airport

    Cold storage tenants close to Memphis International Airport and the FedEx World Hub handle food and pharmaceutical loads that move overnight. A dense block keeps more product in less refrigerated space.

    Freezer work calls for planning around room temperature, defrost schedules and how crews move in and out. Installation crews we schedule and manage stage steel outside the room and work in shifts.

    Comparing Pushback and Pallet Flow

    When lanes run only three to six deep, pushback rack in Memphis is often the better buy. Drivers stay out of the lane and picks are faster.

    When rotation must be strict and volume is high, compare pallet flow rack in Memphis. Gravity lanes enforce FIFO with no driving inside the rack.

    Bulk Lots From the River and Rail Yards

    Users on President's Island and around the Frank C. Pidgeon Industrial Park often receive product by the railcar or barge load. One inbound lot can fill dozens of positions with a single item.

    A drive-in block near the receiving doors swallows that lot in a few lanes. The rest of the building stays free for mixed stock.

    Drive-In Rack Honeycombing and How to Limit It

    Honeycombing is the empty space left when a lane is partly used. Pull three pallets from an eight-deep lane, and those five open slots cannot take a different product.

    The fix is matching lane depth to how product actually moves. In Memphis food buildings, I often split a block into a few deep lanes for the biggest sellers and shorter lanes for the next tier.

    Drive-In Pallet Rack Upkeep in Busy Buildings

    Uprights inside lanes take more contact than selective frames. A quick weekly walk to look for bent rails or scraped columns catches damage early.

    Replacing a single rail arm is simple. Waiting until several are bent is not.

    Plan Your Memphis Block

    Memphis Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing rack since 1997. Read the drive-in rack product overview or go back to our Memphis service area page.

    High volume of a small number of SKUs
    Seasonal or buffer inventory held in bulk
    Cold storage and freezer rooms where cube matters most
    Product too fragile to floor-stack more than two high
    Buildings where floor space, not height, is the binding constraint
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Drive-In Rack Quote for Your Memphis Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Memphis Drive-In Rack Questions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Drive-In Rack in Memphis?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call