
Drive-In Rack in Collierville, TN
Drive-in rack in Collierville usually holds bulk raw material or finished goods for manufacturers and contract packagers in the Collierville Industrial Park. When one item fills a dozen pallets, giving each its own aisle face wastes floor.
Along Highway 72 and Byhalia Road, I see this most with packaging material, resin and finished product waiting to ship.
Finished Goods Staging on Drive-In Pallet Rack
Contract packagers often produce one item in long runs. Those pallets wait for a truck, and they are all the same.
A dense block stores the whole run in a few lanes. Shipping pulls from the open face when the order is ready.
Because the pallets are identical, last in, first out causes no problem.


Operations We Rack Around Here
Nearby areas we work in regularly include the Collierville industrial park near Highway 72, Collierville Industrial Park, Highway 72 corridor, Byhalia Road.
Drive-In Rack Lane Depth and Height
Depth follows how many pallets of each item you keep. Height follows clear height and your truck's lift.
I check both against the heaviest pallet, since load arms carry the pallet edges only.
Mixed pallet sizes cause trouble. Every pallet in a lane should share one footprint.
Raw Material by the Truckload
Precision manufacturers buy corrugated, film and resin in volume. A drive-in block near receiving holds that stock without filling the floor.
Lanes can be assigned per material so drivers know exactly where each one goes.
Forklift Fit and Guide Rails
Automotive component plants often run larger trucks. Their mast and overhead guard dimensions set lane width and the lowest beam height.
Guide rails at the floor keep trucks centered. They save uprights from scrapes over the life of the rack.
When Pushback or Pallet Flow Wins
If lanes would run only three to five deep, pushback rack in Collierville gives faster picks. If lots must ship in order, pallet flow rack in Collierville handles rotation.
Installation crews we schedule and manage phase the work around production.
Driver Habits Inside Dense Lanes
Drivers in a dense block work inside the rack, so speed and alignment matter. Entering square to the lane and lifting clear of the rails before backing out prevents most damage.
We walk your team through those habits at handover. Plants along Byhalia Road with rotating shifts benefit from a short refresher for each crew.
Upright protectors at lane entries add a layer of protection where trucks turn in.
Drive-In Pallet Rack Lane Assignment for Packagers
Contract packaging work changes with each client. I recommend assigning lanes per job rather than per product, so a finished run fills its own lanes and ships together.
When the job ships, those lanes open for the next run.
Labels at each lane entry show the job number so drivers never mix runs.
Drive-In Rack Clearances in Plant Buildings
Plant buildings in the Collierville Industrial Park often have overhead piping, lights and conveyors. Load levels must stay clear of all of them.
I measure to the lowest obstruction and set the highest rail below it with room for the truck's lift.
That also leaves space for future overhead changes.
Common Questions From Collierville Plants
Plant managers ask whether a dense block slows production pulls. It can, slightly, because drivers enter lanes. For finished goods waiting on trucks, that rarely matters.
They also ask about moving the block later. Uprights and rails unbolt, so relocation within the plant is possible.
Finally, people ask how many lanes they need. That comes straight from pallets per item at peak, which is why I start every layout with that count.
Electrical and industrial supply plants near Highway 72 often start small and add lanes as volume grows.
Precision manufacturers sometimes keep a short block for corrugated near the packing line, which keeps boxes close without crowding the floor.
Ask for drawing revisions as often as needed; they cost nothing.
Plant safety staff are welcome at the walkthrough.
About Our Company
Our parent company, Warehouse Equipment & Supplies Co., has supplied and installed racking since 1997. Read the drive-in rack overview or the Collierville service area page.
Recent Installations
Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.










Get a Drive-In Rack Quote for Your Collierville Warehouse
Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.
Memphis Pallet Rack
2298 Young Ave.
Unit #389
Memphis, TN 38104
(901) 417-6960Monday - Saturday: 8:00 AM - 6:00 PM
Collierville Drive-In Rack Questions
Other Rack Types We Supply in Collierville

Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Cantilever Rack
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View details
Warehouse Relocation
Teardown, labeling, transport coordination, and reinstallation of pallet rack and warehouse storage systems in your next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.
Where We Work
Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.
Memphis Pallet Rack
Address
2298 Young Ave.
Unit #389
Memphis, TN 38104
Phone
(901) 417-6960Business Hours
Monday - Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
Need Drive-In Rack in Collierville?
Call (901) 417-6960 or request a quote and we will get a layout started.