Serving the Greater Memphis Area
    Pushback Rack system inside a Tennessee warehouse
    Collierville, Tennessee

    Pushback Rack in Collierville, TN

    A pushback rack lane in Collierville typically holds raw material or finished goods for a manufacturer near Highway 72. Instead of one pallet per opening, you store two to six of the same part number on carts that roll on sloped rails.

    Precision manufacturers and automotive component suppliers in the Collierville Industrial Park tend to run repeat parts in steady quantities. That consistency is what makes deep lanes practical.

    (901) 417-6960

    How Pushback Pallet Rack Handles Repeat Parts

    Load the first pallet onto the front cart. The next load pushes it back one position. Picking reverses the motion, and gravity brings the remaining pallets forward.

    Because the newest pallet is always at the face, this is LIFO storage. Most component inventory tolerates that; anything with lot or date control should move to pallet flow rack in Collierville.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    High-density pushback rack lanes loaded with pallets
    Pushback pallet racking showing cart rails and load beams

    Operations We Rack Around Here

    Nearby areas we work in regularly include the Collierville industrial park near Highway 72, Collierville Industrial Park, Highway 72 corridor, Byhalia Road.

    Precision manufacturing
    Electrical and industrial supply
    Automotive components
    Contract packaging

    Electrical Supply Counters and Deep Storage

    Electrical and industrial supply houses in Collierville split stock between counter sales and pallet reserve. Wire reels and boxed fixtures in repeat quantities fill the reserve side quickly.

    Reels and odd cartons need a stable pallet under them before they go on a cart. Where loads are irregular, we keep them in selective positions with pallet supports instead.

    The counter side needs short travel. We hold the deepest lanes to the far wall so fast single-pallet picks stay near the will-call door.

    Southeast-side buildings off SR-385 are often newer and cleaner inside, with fewer columns to plan around. That freedom lets runs stay continuous, which simplifies cart spacing and beam selection.

    Fitting Lanes Around Production

    Plants along Byhalia Road often share one building between production cells and storage. Every aisle removed from storage returns floor to the line.

    We look at which part numbers hold four or more pallets and convert those runs first. Low-count parts and kitting stock remain in selective bays near the cells.

    Contract packaging tenants often have shifting SKU lists. In that case we keep lanes shallow so the system still works when customers change.

    Sizing Push Back Racking for Heavy Components

    Automotive and electrical parts can load pallets heavily. Carts, beams and frames are each rated, and we size all three from your heaviest pallet rather than an average.

    Clear height matters as well. Taller buildings on the US-72 / SR-385 side can stack more levels, which raises frame loads, so the frame selection follows the beam spacing.

    Adding pushback levels to existing uprights is possible when the connection and capacity line up. Send a photo of the upright face and beam connector.

    Pushback Rack Versus Moving Stock Off-Site

    Some plants near the Highway 72 corridor rent overflow trailers or outside space when the floor fills. Every trip to that overflow costs labor and truck time.

    Converting repeat parts to lanes can bring that overflow back inside. Whether it fully does depends on your counts, and the layout shows the answer in positions rather than guesses.

    Even a partial recovery shortens the daily shuttle runs, which most plant managers notice within the first month.

    Byhalia Road plants sometimes store finished goods on export pallets of unusual size. Those need carts sized to fit, which we confirm before quoting.

    Collierville Pushback Rack: Next Steps

    Part counts, footprint, maximum load and ceiling height are what we need for a counted drawing and itemized price.

    Our parent, Warehouse Equipment & Supplies Co., has supplied and installed rack since 1997. Very deep bulk runs may suit drive-in rack in Collierville. See the pushback rack overview or our Collierville page.

    Two to six pallets of the same SKU stacked in one lane
    Cold storage or leased space where rent per square foot is steep
    Operations trimming aisle count to add positions
    Beverage, packaging, and consumer goods runs
    Buildings with clear height to spare but limited floor
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Pushback Rack Quote for Your Collierville Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Collierville Pushback Rack FAQs

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Pushback Rack in Collierville?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call