Serving the Greater Memphis Area
    Cantilever Rack system inside a Tennessee warehouse
    Collierville, Tennessee

    Cantilever Rack in Collierville, TN

    Cantilever rack in Collierville mostly holds raw material for production: bar stock, tube, extrusions and sheet waiting for the saw or press. With no front posts, a full-length bundle loads on in one pass.

    In the Collierville Industrial Park near Highway 72 and along Byhalia Road, I usually design it beside the cutting area.

    (901) 417-6960

    Raw Material Storage Beside the Saw

    Precision manufacturers want material close to the first operation. A double-sided cantilever run feeding the saw cuts forklift trips.

    Each arm level holds one size or alloy. Operators pull what they need and send remnants to a lower level.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Operations We Rack Around Here

    Nearby areas we work in regularly include the Collierville industrial park near Highway 72, Collierville Industrial Park, Highway 72 corridor, Byhalia Road.

    Precision manufacturing
    Electrical and industrial supply
    Automotive components
    Contract packaging

    Automotive Components and Long Parts

    Automotive component plants handle axles, tubing and frame members. Those parts are long and often oddly shaped.

    Cantilever arms with lips or saddles hold irregular parts steady. I review drawings of your parts before choosing arm type.

    Cantilever Racking for Sheet and Plate

    Sheet can sit on cantilever arms with a deck or on closely spaced arms. Decking stops thin sheet from sagging between supports.

    Heavy plate is usually better on a lower level, close to the floor, where a forklift lifts it with less risk.

    Arm capacity and upright capacity are separate numbers. I check both against your heaviest stack.

    Electrical Supply Conduit on a Cantilever Storage Rack

    Electrical and industrial supply firms store conduit and strut in ten- and twenty-foot lengths. Single-sided wall runs keep it sorted by size.

    Arms placed every few feet stop conduit from bowing. Each level gets a size label so counter staff grab the right one.

    Truck Choice and Aisle Width

    A standard forklift carrying a 20-foot bundle sideways needs a wide aisle. Side-loaders and multi-directional trucks work in tighter space.

    I plan the aisle from the truck you have or plan to buy. Installation crews we schedule and manage can phase the work so production keeps running.

    Remnant Management in Collierville Shops

    Every shop that cuts bar or tube makes remnants. If they go back on the same level as full lengths, they get buried and forgotten.

    I give remnants their own lower arm level, sorted by size, right next to the saw. Operators check there first before cutting a new length.

    That small habit saves material, and the cantilever layout makes it easy to keep.

    Double-Sided Cantilever Rack Feeding Two Cells

    In plants along Byhalia Road, a double-sided run between two work cells lets each cell pull from its own face. Material for one cell never crowds the other.

    Load from one side, pull from the other works too if you want receiving and production kept apart.

    Arm heights can differ by side, so each face matches the stock it holds.

    Contract Packaging Long Goods

    Contract packagers occasionally handle long retail products like poles, rods or rolled goods. A short cantilever run handles a job without converting pallet bays.

    When the job ends, arms move to new heights for the next one.

    Inbound Steel at the Collierville Dock

    Flatbeds bringing bar into plants near Highway 72 usually unload with a forklift from the side. Placing the run close to that door shortens the first move.

    I also leave a staging spot on the floor where a fresh delivery waits for sorting, so nobody stacks new lengths over the old ones in a rush.

    Those two details keep the oldest stock in front of the saw.

    If a second shift runs the saw, I place lights and labels so night operators find stock just as easily.

    Small choices like that keep material moving through every shift.

    Ask for a revision whenever production changes; layouts are easy to redraw.

    Pallet Options in Collierville

    For pallets with strict rotation, look at pallet flow rack in Collierville. For dense single-item pallets, see drive-in rack in Collierville.

    Our parent company, Warehouse Equipment & Supplies Co., has supplied and installed racking since 1997. See the cantilever rack overview or the Collierville service area page.

    Lumber, plywood, and sheet goods
    Pipe, tube, conduit, and bar stock
    Steel service center inventory
    Furniture, doors, and windows
    Long or awkward loads currently sitting on the floor
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Cantilever Rack Quote for Your Collierville Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Collierville Cantilever Rack Questions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Cantilever Rack in Collierville?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call