Serving the Greater Memphis Area
    Cantilever Rack system inside a Tennessee warehouse
    Lakeland, Tennessee

    Cantilever Rack in Lakeland, TN

    Cantilever rack in Lakeland mostly serves contractor storage and outdoor goods around the I-40 and Canada Road interchange. Ladders, boats, kayaks, pipe and lumber are long, and open-front arms take them without posts in the way.

    Along Huff N Puff Road, I see a mix of small warehouses and fenced yards.

    (901) 417-6960

    Contractor Yards and Cantilever Racking

    Contractors keep conduit, pipe, rebar and lumber in the same yard. Each type gets its own section and arm level.

    Outdoor runs need galvanized finish. Roof kits keep lumber drier.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Operations We Rack Around Here

    Nearby areas we work in regularly include the I-40 and Canada Road interchange, Canada Road, I-40 interchange, Huff N Puff Road.

    Regional distribution
    Contractor storage
    Recreation and outdoor goods
    Small-batch manufacturing

    Cantilever Rack Arm Capacity Basics

    Every arm has a rated capacity. The load spreads across all arms it touches.

    I count arms under your heaviest bundle and size each one. Uprights carry the total from all arms on that column.

    Recreation and Outdoor Goods

    Recreation goods like kayaks and canoes are long and light. Padded arms or cradles protect them.

    Light items can sit higher, while heavier pieces stay lower for safer handling.

    Single-sided runs along a wall keep the floor open for display or assembly.

    Small-Batch Manufacturing Material

    Small manufacturers store bar and tube for short runs. A compact cantilever storage rack near the saw keeps material organized by size.

    Remnants on a separate level get used first.

    Aisle and Truck Planning

    Long loads carried sideways need wide aisles. Side-loaders cut that width.

    I lay out aisles for your truck. Installation crews we schedule and manage plan summer work for early hours.

    Expect a CAD layout and an itemized quote from the free design consultation.

    Lakeland Ladder and Pipe Storage on Cantilever Rack

    Ladders are awkward everywhere. On cantilever arms, they lie flat and come off without unstacking a pile.

    Contractors near the I-40 interchange often store ladders on the upper levels and heavy pipe on the bottom.

    Each crew can have a labeled section, which cuts down on borrowed and lost equipment.

    Padding and Arm Covers for Finished Goods

    Boats, kayaks and finished outdoor products scratch on bare steel. Padded arm covers or cradles fix that.

    I also widen spacing slightly for wide hulls so they sit on the flattest part.

    Hand Loading Versus Forklift Loading

    If staff load by hand, I keep the highest arm level at reach height. Anything higher needs a lift.

    For forklift loading, levels can go as high as the truck reaches. The choice changes upright height and price, so we settle it early in the design.

    A mixed run with hand levels at the bottom and forklift levels above works well in small Lakeland warehouses.

    Deciding How Many Levels a Lakeland Run Needs

    Count the product groups you want separated and how many pieces of each you keep. That tells me roughly how many arm levels each section needs.

    Then I check your truck's lift height and the room's clear height. Whichever is lower sets the highest usable arm.

    Extra upright height you cannot reach is money spent on nothing, so I keep frames to the height you will actually load.

    Arms bolt into the upright at set intervals, so levels can shift later if your stock changes.

    Contractor storage near Huff N Puff Road often mixes hand-loaded and forklift-loaded stock in one building.

    Splitting levels that way keeps small items reachable while bundles still go up high.

    It also lets one run serve both a shop crew and a yard driver without anyone waiting.

    Recreation goods sellers near Canada Road see seasonal swings, so a few spare cradles go a long way in spring.

    Small warehouses near the I-40 interchange often have one overhead door. I keep the run clear of it so deliveries never clip an arm, and I leave turning room for the forklift.

    Pallet Options in Lakeland

    Palletized goods with rotation fit pallet flow rack in Lakeland. Bulk pallets fit drive-in rack in Lakeland.

    Memphis Pallet Rack runs as one division of Warehouse Equipment & Supplies Co., active since 1997. See the cantilever rack page or our Lakeland service area page.

    Lumber, plywood, and sheet goods
    Pipe, tube, conduit, and bar stock
    Steel service center inventory
    Furniture, doors, and windows
    Long or awkward loads currently sitting on the floor
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Cantilever Rack Quote for Your Lakeland Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Lakeland Cantilever Rack Questions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Cantilever Rack in Lakeland?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call