Serving the Greater Memphis Area
    Cantilever Rack system inside a Tennessee warehouse
    Atoka, Tennessee

    Cantilever Rack in Atoka, TN

    Cantilever rack in Atoka mainly serves building supply yards and contractor storage along the Highway 51 corridor. Lumber, pipe, trim and conduit are long, and open arms let a forklift load them directly.

    Around the Atoka industrial area and Brighton, many yards are outdoors or under simple sheds.

    (901) 417-6960

    Building Supply Yards on Cantilever Racking

    Building supply dealers store studs, beams, trim and sheet goods. Long lumber goes on arms; sheet goods sit on decked levels.

    Each size gets its own section.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Operations We Rack Around Here

    Nearby areas we work in regularly include the Highway 51 corridor north of Memphis, Highway 51 corridor, Atoka industrial area, Brighton.

    Building supply
    Agricultural distribution
    Contractor storage
    Small manufacturing

    Outdoor Cantilever Rack Options

    Galvanized uprights and arms handle weather. Roof kits keep lumber drier.

    Anchoring matters during spring storms; loads stay within rated capacity.

    Contractor Storage

    Contractors keep rebar, pipe and conduit. A single-sided run along a fence line keeps the yard open.

    Inclined arms keep round stock from rolling.

    Labels by size help crews grab material fast.

    Agricultural Distribution and Small Manufacturing

    Ag distributors store fencing, gates and pipe. Small manufacturers store bar and tube.

    A cantilever storage rack sized for each keeps material organized.

    Planning and Installation

    Item lengths, weights and truck type set the design. The free design consultation turns those facts into a CAD plan and itemized quote.

    Installation crews we schedule and manage start early in summer heat.

    Sheds and Roof Kits for Atoka Yards

    Many Atoka yards store lumber under simple sheds. Cantilever uprights can stand inside a shed, or a roof kit on the rack itself can replace one.

    Roof kits attach to the uprights and cover the arms. They keep rain off the load without a separate building.

    I size the roof overhang to your longest arm.

    Cantilever Racking for Mixed Contractor Stock

    Contractors near Brighton often store a little of everything: pipe, conduit, lumber, rebar and ladders.

    A single run with varied arm lengths handles it. Short arms for pipe, longer arms for lumber bundles.

    Each type gets a labeled section so crews load the truck quickly in the morning.

    Forklift Access in Small Yards

    Small yards rarely have room for wide aisles. A side-loader or a forklift with a fork extension can work narrower aisles.

    If neither is available, I place runs so the forklift can approach from an open side.

    Questions Atoka Yard Owners Ask Me

    The first question is usually whether arms can bend under heavy lumber. They will not if the load stays within the rating posted on each arm, which is why I size from your heaviest bundle.

    The second is whether the rack can move. It can, since uprights unbolt from bases and anchors come out.

    The third is outdoor finish. Galvanized steel costs more than paint but holds up far longer in an open yard along Highway 51.

    Owners also ask about adding a section later. Runs extend by adding uprights and braces at the end, so growth is simple.

    Finally, people want to know how long installation takes. That depends on run length and site access, and I give a schedule once the layout is set.

    Most Atoka owners also want to keep a simple lean-to or shed they already have. I can place uprights inside it or beside it.

    Where a shed is too short for long lumber, a roof kit on the rack is often the better choice.

    I sketch both options so you can compare floor use and price.

    None of that needs a big budget to start. One run along the fence often handles the busiest lengths.

    Send a few yard photos with a tape measure in frame, and I can usually draw a first layout without a second trip from you to our office.

    Those photos also show low spots where water pools after rain, and I keep bases away from them.

    Pallet Options in Atoka

    For pallets with rotation, see pallet flow rack in Atoka. For dense pallets, see drive-in rack in Atoka.

    Our work is backed by Warehouse Equipment & Supplies Co., which began supplying rack in 1997. See the cantilever rack page or our Atoka service area page.

    Lumber, plywood, and sheet goods
    Pipe, tube, conduit, and bar stock
    Steel service center inventory
    Furniture, doors, and windows
    Long or awkward loads currently sitting on the floor
    Call (901) 417-6960

    Recent Installations

    Racking projects completed for warehouses across west Tennessee, north Mississippi, and eastern Arkansas.

    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack
    Pallet rack and warehouse racking installation by Memphis Pallet Rack

    Get a Cantilever Rack Quote for Your Atoka Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (901) 417-6960.

    Memphis Pallet Rack

    2298 Young Ave.

    Unit #389

    Memphis, TN 38104

    (901) 417-6960

    Monday - Saturday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Atoka Cantilever Rack Questions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers west Tennessee, north Mississippi, and eastern Arkansas, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Memphis, we serve the entire Greater Memphis region with industrial pallet racks and warehouse storage solutions.

    Memphis Pallet Rack

    Address

    2298 Young Ave.
    Unit #389
    Memphis, TN 38104

    Business Hours

    Monday - Saturday: 8:00 AM - 6:00 PM

    Sunday: Closed

    Need Cantilever Rack in Atoka?

    Call (901) 417-6960 or request a quote and we will get a layout started.

    (901) 417-6960
    Tap to Call